Description
Built-in Bluetooth Smart
The wireless solution for setting up, monitoring and updating the SmartSolar charge controller.
VE.Direct
For a wired data connection with a Color Control GX, other GX products, a PC or other devices.
Ultra-fast maximum power point tracking (MPPT)
Particularly in cloudy weather, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30 % compared to PWM charging controllers.
energy yield by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Advanced maximum power point detection with partial shading.
In the case of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve.
Conventional MPPTs tend to adjust to a local MPP. However, this may not be the optimal MPP.
The innovative algorithm of the BlueSolar device will always maximize the energy yield by adjusting to the optimal MPP.
Outstanding efficiency
No cooling fan. Maximum efficiency at over 98 %.
Full output current up to 40 °C (104 °F).
Flexible charging algorithms
Fully programmable charging algorithm (see also the software page on our website) and eight pre-programmed algorithms
algorithms that can be selected using a rotary knob (see our manual for more details).
Comprehensive electronic protection
Overheating protection and load reduction at high temperatures.
Protection against PV short circuit and PV reverse polarity.
PV reverse current protection.
Internal temperature sensor
Equalizes constant and charge retention voltages according to temperature.
Option external battery voltage and temperature measurement via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to transmit the battery voltage and temperature data to one or more SmartSolar charge controllers.
temperature to one or more SmartSolar charge controllers.
Recovery function for fully discharged batteries
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged lithium-ion battery with internal disconnect function.
SmartSolar MPPT 100/30 & 100/50 data sheet (PDF)
Technical data:
- Model: MPPT 100/30
- Battery voltage: 12/ 24 V
- Nominal charging current: 30 A
- Nominal PV power (12 V): 440 W
- Nominal PV power (24 V): 880 W
- Short-circuit current: max. 35 A
- PV open-circuit voltage: max. 100 V
- Peak efficiency: 98%
Reviews
There are no reviews yet.