Description
Ultra-fast maximum power point tracking (MPPT)
Especially in overcast conditions, when the light intensity is constantly changing, an ultra-fast MPPT controller improves the energy yield by up to 30 % compared to PWM charging controllers, and by up to 10 % compared to slower MPPT controllers.
Advanced maximum power point detection with partial shading.
With partial shading, two or more maximum power points (MPP) can occur on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP. However, this may not be the optimum MPP.
The innovative algorithm of the SmartSolar device will always maximize the energy yield by adjusting to the optimal MPP.
Outstanding efficiency
No cooling fan. Maximum efficiency of over 98 %.
Flexible charging algorithms
Fully programmable charging algorithm and eight pre-programmed algorithms that can be selected via a rotary knob (for more details, see operating instructions).
Comprehensive electronic protection
Overtemperature protection and load reduction at elevated temperatures.
Protection against PV short circuit and PV reverse polarity.
PV reverse current protection.
Built-in Bluetooth Smart
The wireless solution for setting up, monitoring, updating and synchronizing SmartSolar charge controllers.
Internal temperature sensor and optional external measurement of battery voltage, temperature and current via Bluetooth
With a Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt, the voltage and temperature of the battery (and current, in the case of a BMV-712 or a SmartShunt) can be transmitted to one or more SmartSolar charge controllers.
VE.Direct and VE.Can
For a wired data connection with a Color Control GX, other GX products, a PC or other devices.
Recovery function for fully discharged batteries
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged lithium-ion battery with internal disconnect function.
VE.Can: the solution for multiple controllers
Up to 25 devices can be synchronized with VE.Can, up to 10 devices with Bluetooth
Remote on/off
For example, for connection to a VE.BUS BMS
Programmable relay
Can be programmed to switch in the event of an alarm or other events.
Option: SmartSolar plug-in LCD display
Simply remove the rubber seal that protects the plug on the front of the controller and plug in the display.
Data sheet SmartSolar charge controller MPPT 150/70 up to 150/100 VE.Can (PDF)
Technical data:
- Model: MPPT 150/85-MC4 VE.Can
- Battery voltage: 12/24/48 V automatic selection (36 V: manual)
- Nominal charging current: 85 A
- Nominal PV power (12 V): 1200 W
- Nominal PV power (24 V): 2400 W
- Nominal PV power (36 V): 3600 W
- Nominal PV power (48 V): 4900 W
- Short-circuit current: 70 A (max. 30 A per MC4 connection)
- PV open-circuit voltage: 150 V absolute maximum value coldest conditions 145 V maximum value for switching on and operation
- Peak efficiency: 98%
Reviews
There are no reviews yet.