Description
Built-in Bluetooth Smart
The wireless solution for setting up, monitoring and updating the SmartSolar charge controller.
Ultra-fast maximum power point tracking (MPPT)
Especially in overcast conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30 % compared to PWM charging controllers and by up to 10 % compared to slower MPPT controllers.
Advanced maximum power point detection with partial shading
In the case of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve.
Conventional MPPTs tend to adjust to a local MPP. However, this may not be the optimum MPP.
The innovative algorithm of the SmartSolar device will always maximize the energy yield by adjusting to the optimal MPP.
Outstanding efficiency
No cooling fan. Maximum efficiency of over 99 %.
Flexible charging algorithms
Fully programmable charging algorithm (see also the software page on our website) and eight pre-programmed algorithms that can be selected via a rotary knob (see our manual for more details).
Comprehensive electronic protection
Overheating protection and load reduction at high temperatures.
Protection against PV short circuit and PV reverse polarity.
PV reverse current protection.
Internal temperature sensor and optional external battery voltage and temperature measurement via Bluetooth
With a Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt, the voltage and temperature of the battery (and current, in the case of a BMV-712 or a SmartShunt) can be transmitted to one or more SmartSolar charge controllers.
Synchronized parallel charging with Bluetooth
Up to 10 devices can be synchronized via Bluetooth.
Recovery function for fully discharged batteries
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged lithium-ion battery with internal disconnect function.
VE.Direct
For a wired data connection with a Color Control GX, other GX products, a PC or other devices.
Remote-controlled on/off switching
For example, for connection to a VE.BUS BMS
Programmable relay
Can be programmed (e.g. with a smartphone) to trigger an alarm or other events.
Optional: plug-in LCD display
Simply remove the rubber seal that protects the plug on the front of the controller and plug in the display.
Data sheet SmartSolar MPPT 250/60 and 250/70 (PDF)
Technical data:
- Model: MPPT 250/60
- Battery voltage: 12 / 24 /48 V Auto Select (software tool required to select 36 V)
- Nominal charging current: 60 A
- Nominal PV power (12 V): 860 W
- Nominal PV power (24 V): 1720 W
- Nominal PV power (36 V): 2580 W
- Nominal PV power (48 V): 3440 W
- Short-circuit current: 35 A
- PV open-circuit voltage: 250 V absolute maximum value coldest conditions 245 V maximum value for switch-on and operation
- Peak efficiency: 99%
Reviews
There are no reviews yet.